Details Images

Products Description

Features:

Specification Weight: 0.5 g (receiver) Dimensions: 11mm x 18mm Requirements: Firmware V2.25 Contains 1x TBS Crossfire Nano Receiver 1x TBS Immortal-T Antenna 6x 30awg silicon connecting cables (2 black, 2 red, 1 white, 1 yellow) 1 x pin header 1x4TBS Receiver pairing: 1. First, completely disconnect the power supply on the aircraft; 2. First press and hold the small black dot on the receiver without letting go, then connect the power; 3. About 3 seconds after powering on, release the little black dot; 4. Press and hold the small black dot again for about 10-15 seconds. At this time, the receiver will turn into a green light flashing slowly; at this time, the receiver is in the frequency binding state. Press the high frequency head or control Run BIND; at this time, the tuner or TANGO 2 will ask you if you want to update the receiver, please press ENTER; if the tuner enters the blue flashing state, please wait 1-2 Do not move any buttons for 10 minutes. After that, wait a moment until the lights on the tuner and receiver turn into fixed green lights that do not flash, indicating that the linking is complete.